Waxing Syllabus

Sample Lesson Plan

A. Sanitation and safety standards for salons
Any salon, school or facility where waxing services are delivered to the public must be clean and sanitary at all times. Compliance with these rules does not confer compliance with other requirements set forth by federal, state and local laws, codes, ordinances, and regulations as they apply to business operation, physical construction and maintenance, safety, and public health. Licensees and certificate holders shall take sufficient measures to prevent the transmission of communicable and infectious diseases and comply with the sanitation standards identified in this section and shall insure that all employees likewise comply.

B. Disinfection and storage of implements.
All wax pots will be cleaned and disinfected with an EPA registered hospital (grade) and tuber culocidal disinfectant solution with no sticks left standing in the wax at any time.

C. General sanitation and safety requirements.
All furniture, walls, floors, and windows shall be clean and in good repair.
1. The floor surface in the immediate work area must be of a washable surface other than carpet. The floor must be kept clean, free of hair, dropped articles, spills and electrical cords; Board for Barbers and Cosmetology Wax Technician Regulations
2. Walls and ceilings in the immediate work area must be in good repair, free of water seepage and dirt. Any mats shall be secured or shall lay flat;
3. A fully functional bathroom with a working toilet and sink must be readily available for clients. Fixtures must be in good condition. The bathroom must be lighted and sufficiently ventilated. If there is a window, it must have a screen. There must be antibacterial soap and clean individual towels for the client’s use. Laundering of towels is allowed, space permitting. The bathroom must not be used as a work area or for the open storage of chemicals;
4. General areas for client use must be neat and clean with a waste receptacle for common trash;
5. Electrical cords shall be placed to prevent entanglement by the client or licensee;
6. Electrical outlets shall be covered by plates;
7. The salon area shall be sufficiently ventilated to exhaust hazardous or objectionable airborne chemicals, and to allow the free flow of air;
8. Adequate lighting shall be provided.

D. Equipment sanitation.
1. Waxing tables shall be cleaned and sanitized after each use and any other objects that touch the client shall be cleaned and sanitized after each use or disposed of;
2. The top of work stands or back bars shall be kept clean;
3. The work area shall be free of clutter, trash, and any other items which may cause a hazard;
4. Heat producing appliances and equipment shall be placed so as to prevent any accidental injury to the client or licensee; and
5. Electrical appliances and equipment shall be in safe working order at all times.

E. Articles, tools and products.
1. The temperature of waxing products shall be in accordance with the manufacturer’s specifications and shall be tested prior to application to ensure client safety;
2. Any multi-use article, tool or product which cannot be cleansed or sanitized is prohibited from use;
3. Soiled implements must be removed from the tops of work stations immediately after use;
4. Clean spatulas, other clean tools, or clean disposable gloves shall be used to remove bulk substances from containers;
5. A clean spatula shall be used to remove creams or ointments from jars. Sterile cotton shall be used to apply creams, lotions and powders. Cosmetic containers shall be recovered after each use;
6. All sharp tools, implements, and heat-producing appliances shall be safely stored;
7. Pre-sanitized tools and implements, linens and equipment shall be stored for use in a sanitary enclosed cabinet or covered receptacle; Board for Barbers and Cosmetology Wax Technician Regulations
8. Soiled towels, linens and implements shall be deposited in a container made of cleanable materials and separate from those that are clean or pre-sanitized;
9. No substance other than a sterile styptic powder or sterile liquid astringent approved for homeostasis and applied with a sterile single-use applicator shall be used to check bleeding; and
10. Any disposable material making contact with blood or other body fluid shall be disposed of in a sealed plastic bag and removed from the shop, salon, school or facility in accordance with the guidelines of the Department of Health.

F. Chemical storage and emergency information.
1. Salons, schools and facilities shall have in the immediate working area a binder with all Material Safety Data Sheets (MSDS) provided by manufacturers for any chemical products used.
2. Salons, schools and facilities shall have a blood spill clean-up kit in the work area.
3. Flammable chemicals shall be stored in a non-flammable storage cabinet or a properly ventilated room.
4. Chemicals that could interact in a hazardous manner (oxidizers, catalysts and solvents) shall be separated in storage.

G. Client health guidelines:
1. All waxing services must be performed in a prescribed manner to avoid burns or bruising to the client’s skin.
2. All employees providing client services shall cleanse their hands with an antibacterial product prior to providing services to each client.
3. No salon, school or facility providing waxing services shall have on the premises waxing products containing hazardous substances that have been banned by the U.S. Food and Drug Administration (FDA) for use in waxing products;
4. No product shall be used in a manner that is disapproved by the FDA; and
5. All regulated services must be performed in a facility that is in compliance with all applicable building and zoning codes.


Students will be given evaluations at 100, and 175hrs. Students are required to maintain a 75 % grade point average for their academic test scores, practical grade sheets and maintain a minimum cumulative attendance rate of 80%. Test grades, practical grades and attendance will be monitored monthly. Students are required to achieve a 75% grade point average on their test scores and practical grade sheets.

Tests will be given periodically during the month to evaluate your progress.



A (Superior) 100 – 90
B (Good) 89 – 80
C (Satisfactory) 79 – 75
D (Unsatisfactory) 74 – or below

Evaluations will be conducted at 100 and 175 hours. A student not meeting the standards for Satisfactory Academic Progress have to pay the exam fee again for the second time exam.

Students returning to school from a leave of absence will re-enter their training in the same status as when they left school, for the purposes of Satisfactory Academic Progress.


Students are assigned theory study and a minimum number of practical experiences. Theory is evaluated after each unit of study. Practical assignments are evaluated as completed and counted toward course completion ONLY when rated as satisfactory. If the performance does not meet satisfactory requirements, it is not counted and the performance must be repeated. At least two comprehensive practical skills evaluations will be conducted during the course of study.

Practical skills are evaluated according to text procedures, performance standards established by the state licensing agency, and set forth in practical skills evaluation criteria adopted by the Yuri Academy.

Students must maintain a theory grade average of 75% and pass a FINAL written and practical exam prior to graduation. Students must make up failed or missed tests and incomplete assignments. Numerical grades are considered according to the following scale:


Passing grades at Yuri Academy are 75% in academics, state board and laboratory work.

We give a written test every Friday which is graded as soon as possible and given back to the student. All laboratory work is recorded as the customer is completed, and is entered on the monthly grade sheet. All state board work is recorded as soon as it is completed and is entered on the weekly state board grade sheet.

Grade reports are furnished to each student at the end of each quarter.



Classes are scheduled daily Monday through Friday. Observed holidays are New Year’s Day, The Monday following Easter, Memorial Day, Labor Day, Thanksgiving Day and the day after Thanksgiving, the week that Independence Day falls in, and the week between Christmas Day and New Years Day (the actual dates vary based on which day of the week the actual holiday occurs). Additional days off are published well in advance. Students may call local radio stations to obtain pertinent information regarding unexpected closures due to extenuating circumstances such as inclement weather. New classes begin weekly with a few exceptions.

Students meeting requirements at the end of each payment period will be considered making Satisfactory Progress. In order for a student to be considered making Satisfactory Progress, the student must meet both attendance and academic minimum requirements

Students are required to be in class no later than 8:35am. No student will be admitted to class after 8:35 am Monday though Friday.

A time card is provided for each student. Students are responsible for clocking in and out upon arrival and departure. The time card is the official proof of attendance. At no time shall the time card leave the school.

youriarlingtonWaxing Course Syllabus